Table of Contents
Advertisement
4. Fan Calibration
Note: Always perform an F-type Fan Calibration after
replacing an F-type fan
Criteria
- If the Fan calibration failure please change the
corresponding fan.
Procedure
- Plug in power cord and AC on.
- Hold "Left" button then press "Power" button.
- Release "Left" button when the lamp lights
- After several minutes, the projector will auto- power on
Note: If the Fan RPM is 9999, please do calibration again.
EK-610U/EK-611W/EK-612X
4-7
Advertisement
Table of Contents
Troubleshooting
