Table of Contents
Advertisement
(3) PC Calibration (For VGA port)
Procedure
Criteria
- Test equipment: video generator.
- Test signal:1920x1200@60Hz
- Test pattern: Grays 16.
- Input the signal from VGA port.
- Get into factory mode.
- Select "ADC Calibration".
- Press "Auto" key to execute the PC
calibration.
- If there is noise on the screen, the product is
considered as failure product.
-The screen appears normal, it shouldn't
appear any abnormal condition, such as
lines and so on.
EK-610U/EK-611W/EK-612X
4-6
Advertisement
Table of Contents
Troubleshooting
