Specifications - Acoustat Two/M Owners Manual And Assemly Instruction

In addition, the Acoustat Corporation will continue to warrant the product at our option as long
service, subject to the conditions below. Acoustat Corporation warrants to the owner that the Dynamlc
Woofer employed in the 2mH and 3mH will perform as
materials and workmanship for a period
Acoustat Corporation will repair defective units without charge for labor or
conditions
a) unit must not have been altered or damaged through misuse. abuse, negligence, accident. or
T h e
improper operation
b) All repairs must
be
Corporation. Units submitted for warranty repairs must be shipped in the factory packing carton to
Acoustat Corporation or its designated owner, and
insurance prepaid by Acoustat Corporatlon.
c)
Normal wear and maintenance am not covered by this warranty
d) Fuses have not been bypassed and only fuses of the proper value have been used.
A C O U S T A T CORFORATION SHALL N O T
DAMAGES O R LIABILITIES R E S U L T I N G FROM T H E USE AND OPERATION
R E S U L T I N G F R O M ANY B R E A C H O F
PRODUCT.
Some states do not allow exclusion or limitation of incidental or consequential damages,
limitation or exclusion may not apply to you.
Thls warranty give you specific legal rights and you

SPECIFICATIONS

MODEL TWO/M- Frequency Response: 35-20 KHz +/- 2 dB ; Sound Pressure Level: 108 dB 18' in a 14 x22 "
room. (Program Material Peaks); Minimum Power Requirements 100 Watts Per Channel; Nomlnal
Impedance: Ohms Power Consumption: 5
4
(Controls frequencies above 10 K Hz); Dimenslons 7 2
speaker with Interface)
MODELTHREE/M-Frequency Response: 30-20K Hz +/- 3dB Sound Pressure Level: 1 10 dB 18' in a 14'x22'
room. (Program Material Peaks); Minimum Power Requirements: 70 Watts Per Channel; Nominal
impedance: Ohms Power Consumption 5 Watts (120v.
4
(Controls frequencies above 10K Hz); Dimenslons 7 2 x 2 8 x
speoker with interface)
MODEL TWO/MH-Frequency Response:30-20KHz
room.
(Program Material Peaks); Minimum Power Requirements: 40 Watts Per Channel; Nominal
Impedance: Ohms Power Consumption: 5 Watts (120~
4
frequencles
(Controls
13'; Weight 110 (Net weight
Ibs.
MODELTHREE/MH-FrequencyResponse:30-2OKHz
room.
(Program Material Peaks): Minimum Power Requirements: 40 Watts Per Channel; Nominal
impedance: Ohms Power Consumption:
4
(Controls frequencies above 10K
Weight 127 Ibs. (Net weight for
of
(2)
undertaken at the factory
R E S P O N S I B L E
BE
WARRANTY O R ANY IMPLIED W A R R A N T Y RELATING T O
THIS
above 10K Dimensions 7 2 x 20" x 3 1/2"; Woofer enclosure: 21" x 18" x
Hz);
one speaker with interface)
for
5
Dimensions 72' x 28" x 3 1/2 "; Woofer enclosure: 21" x 1 8
Hz);
one
speaker with Interface)
and that it will
specified
two
from the original date of manufacture.
years
o r other service center designated by Acoustat
returned to the owner freight and
will be
WAY F O R CONSEQUENTIAL O R i N Dl R ECT
IN ANV
OF THE
may
have other rights which vary from state
(120v. Hz); Control: High Frequency Balance
Watts 50/60
x 20" x 3 1/2"; Weight 81 Ibs. (Net weight for one
50/60 Hz); Control: High Frequency Balance
3 1/2"; Weight
dB;Sound Pressure Level: 11OdB@ 18 in a 14'x22'
+/-3
50/60 Hz);
+ / - 3dB;Sound Pressure Level:
Watts (120~ 50/60 Hz); Control: High Frequency Balance
of
free
be
parts
subject to the following
PRODUCT COVERED HEREIN O R
so
(Net weight for one
98 Ibs.
Control: High Frequency Balance
18' in a l4'x22'
112dB@
it is In
a s
defects in
SAID
THE
the above
t o
state.
x
13;