Specifications; Ec Declaration Of Conformity - Makita HS300D Instruction Manual

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
2-1. Clamping screw
2-2. Depth guide
3-1. Clamping screw
3-2. Bevel scale plate
4-1. Cutting line
5-1. Lock-off lever

SPECIFICATIONS

Max. Cutting depth
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-2. Switch trigger
6-1. Shaft lock
6-2. Hex wrench
7-1. Hex bolt
7-2. Outer flange
7-3. Saw blade
7-4. Inner flange
8-1. Hex bolt
Model
Blade diameter
at 90°
at 45°
-1
)
Overall length
Net weight
Rated voltage
noise level determined
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,W
2
ENE028-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
ENG905-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

ENG900-1
We Makita
sum)
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Circular Saw
Model No./ Type: HS300D
are of series production and
ENG901-1
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
3
8-2. Protrusion
8-3. Outer flange
8-4. Saw blade
8-5. Inner flange
8-6. Protrusion (bigger side)
9-1. Hex wrench
10-1. Dust nozzle (accessory)
10-2. Screw
HS300D
85 mm
25.5 mm
16.5 mm
1,400
300 mm
1.5 kg
D.C. 10.8 V
Corporation as the
ENH101-16
responsible