Setting White Balance - JVC GZ-N1 Detailed User Manual

Setting White Balance

You can set the color tone to suit the light source.
1
Select the Manual recording mode.
If the mode is P Intelligent Auto, tap P on the recording screen
0
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
2
Tap the B button.
The top menu appears.
0
3
Tap "RECORD SETTING".
4
Tap "WHITE BALANCE".
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
5
Tap the appropriate shooting environment.
Select the item by using 0 or 1, then tap "SET". (Tap the icon directly
0
to select.)
The White Balance icon appears on the screen upon completing the
0
setting.
Setting
n AUTO Adjusts automatically to the natural colors.
l MWB Use this when the problem of unnatural colors is
not resolved.
m FINE Set this when shooting outdoors on a sunny day.
p CLOUD Set this when shooting on a cloudy day or inside a
shade.
o HALOGEN Set this when shooting under illumination such as
a video light.
q MARINE:BLUE Set this when shooting the sea at deep water area
(water appears blue) using a commercially
available waterproof case.
Set this when shooting the sea at shallow water
r
MARINE:GREEN area (water appears green) using a commercially
available waterproof case.
Using MWB
1
Hold a sheet of plain white paper in front of the lens so that the white
paper fills the screen.
2
Point the cursor to "MWB", tap and hold "SET" or the "MWB" icon.
3
Release your touch after the menu disappears and o lights up.
Memo :
The setting will not change if "MWB" is being tapped too fast (less than 1
0
second).
Recording
Details
27