CAMCORDER Detailed User Guide GZ-R315 GZ-R310 C5B5_R315_EU_EN...
Protecting Files ..............59 Table of Contents Protecting/Releasing Protection of the Currently Displayed File .................. 59 Protecting/Releasing Protection of Selected Files ....60 Getting Started Capturing a Still Image in the Video During Playback .... 61 Verifying the Accessories ............3 Capturing a Required Part in the Video (TRIMMING) ....
Getting Started Verifying the Accessories If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center. Illustration Description AC Adapter AC-V10E UIA312-0520 Charges this unit. Attach the charging adapter cable to the tip of the cord.
Stop using the unit underwater if there are damages to the cover, etc. and consult your JVC dealer or the nearest JVC service center. Do not apply excessive force when opening/closing the terminal cover.
(when the provided AC adapter is used) When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center. Caution : There are certain specifications for a USB rechargeable device.
Stop using the unit underwater if there are damages to the cover, etc. STD-810F Method; Note: Temperatures and consult your JVC dealer or the nearest service center. 516.5 between −10°C and Use within a water depth of 5 m and a duration of 30 minutes.
Getting Started Maintenance after Use Other Precautions After using underwater or in dusty places, rinse the camera with water Do not leave the camera under low temperature in cold climates or under immediately and dry it completely. high temperature above 40 °C (such as under direct sunlight, inside a vehicle in the hot sun, or near a heater).
Getting Started Grip Adjustment Attaching the Core Filter Attach a core filter to the AV cable that is connected to this unit. The core filter reduces interference when this unit is connected to other devices. A Open the pad B Adjust the length of the belt C Close the pad Caution : Be sure to fasten the grip belt properly.
Getting Started Inserting an SD Card Removing the Card Push the SD card inward once, then pull it out straight. Insert a commercially available SD card before recording. “Types of Usable SD Card” (A p. 9) “Approximate Video Recording Time” (A p. 46) Open the terminal cover.
Getting Started Memo : When your computer cannot recognize the SDXC card Using SD cards (including SDHC/SDXC cards) other than those specified Confirm and update the OS of your computer. above may result in recording failure or data loss. This unit is not guaranteed to operate with all SD cards. Some SD cards Windows Make sure that the operating system version is SP1 or may not work due to specification changes, etc.
Getting Started Using the Touch Screen Locking the Screen (when Shooting Underwater) Lock the screen before using this unit underwater to prevent operation errors The LCD monitor of this unit is a touch panel which enables operations by on the touch screen. touching the screen.
Getting Started Adjusting the Touch Panel Tap “OK”. Adjusts the response position of the buttons on the touch screen. Tap “MENU”. Setting ends and returns to the menu screen. Caution : Do not tap areas other than the “+” mark during touch screen adjustment Tap “SETUP”.
Getting Started Names of Buttons and Functions on the LCD Monitor Playback Screen (Video) The following screens are displayed during the A video and B still image modes, and operate as touch screens. Recording Screen (Video/Still Image) When this unit is not operated, the operation buttons on the LCD monitor disappear automatically.
Getting Started Playback Screen (Still Image) Index Screen (Thumbnail Display) Display When this unit is not operated, the operation buttons on the LCD monitor A/B (Video/Still Image) Mode Button disappear automatically. Tap on the screen to display the operation Switches between A video and B still image modes. buttons again.
Getting Started Menu screen (recording mode) Menu screen (playback mode) SILENT Button SILENT Button “Using the Silent Mode” (A p. 23) “Using the Silent Mode” (A p. 23) INFO. Button INFO. Button (Displayed only after playback) “Checking the Remaining Recording Time” (A p. 45) “Checking the Recording Date and Other Information”...
Getting Started Clock Setting Resetting the Clock Set the clock with “DATE & TIME” from the menu. The “SET DATE/TIME!” screen appears when you turn on this unit for the Tap “MENU”. first time after purchase, when it has not been used for a long time, or when the clock is not set yet.
Getting Started Changing the Display Language Select the region where you live and tap “SAVE”. The language on the display can be changed. Tap “MENU”. Time difference between the selected city and the GMT (Greenwich Mean Time) is displayed. Tap 0 or 1 to select the city name. Tap “SETUP”.
Getting Started Holding this Unit Tripod Mounting When holding this unit, keep your elbows close to your sides to prevent This unit can be mounted on a tripod (or monopod). This is useful for camera shake. preventing camera shake and recording from the fixed position. To prevent this unit from falling off, check the tripod mounting screw holes and positioning holes on the unit carefully before mounting, and turn the screws until they are fastened firmly.
Getting Started Using this Unit Overseas Setting the Clock to Local Time when Traveling Change the date and time display to the local time by selecting your travel The shape of the power outlet varies according to countries and regions. destination in “AREA SETTING”...
Getting Started Setting Daylight Saving Time Optional Accessories When “ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set 1 hour ahead. Product Name Description Tap “MENU”. HDMI Mini Cable Allows viewing in high picture quality when VX-HD310 connected to a TV.
Recording Taking Videos in Auto Mode Indications for Video Recording You can record without worrying about the setting details by using the P Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions. In case of specific shooting scenes such as person etc., its icon is displayed on the screen.
Recording Scenes of Intelligent Auto Operation Buttons for Video Recording Display Icon Description Captures one’s skin beautifully. Allows people to be captured naturally. Record a group of people with the most suitable settings. Records while focusing on a near object. Focuses at a far distance and captures a sharp image with vivid colors.
- Once deleted, recorded contents (data), including data loss due to malfunctions in this unit, cannot be restored. Please be forewarned. - JVC will not be responsible for any lost data. - In order for quality improvement, defective recording medium is subject to be analyzed.
Recording Capturing Still Images During Video Recording Taking Still Images in Auto Mode Still images can be captured by tapping the A button while in the video mode You can record without worrying about the setting details by using the P (standby or recording).
Recording Scenes of Intelligent Auto Indications During Still Image Recording Display Icon Description Captures one’s skin beautifully. Allows people to be captured naturally. Record a group of people with the most suitable settings. Records while focusing on a near object. Focuses at a far distance and captures a sharp image with vivid colors.
Recording Operation Buttons for Still Image Recording Using the Silent Mode When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. T appears when “SILENT MODE”...
Recording Zooming The angle of view can be adjusted using zoom. Use the W end (wide angle end) to shoot a wider field of view. Use the T end (telephoto end) to magnify the subject for shooting. The following zoom options are available: - Optical zoom (1 - 40x) - Dynamic zoom (41 - 60x) - Digital zoom (41 - 200x)
Recording Manual Recording Tap “RECORD SETTING”. You can adjust settings, such as brightness, by using the manual mode. Manual recording can be set for both video and still image modes. Open the LCD monitor. Tap the item to set manually. Set the recording mode to either A video or B still image.
Recording Adjusting Focus Manually (FOCUS) Tap “MANUAL”. Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired. Select the Manual recording mode. Adjust the focus. If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen.
Recording Adjusting Brightness Tap “MANUAL”. You can adjust the brightness to your preferred level. Select the Manual recording mode. Adjust the brightness value. If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.
Recording Setting Backlight Compensation Tap “ON” or “ADVANCE”. You can correct the image when the subject appears too dark due to backlight. Select the Manual recording mode. “ADVANCE” is designed to perform more effective backlight compensation. Choose this when the backlight compensation is not adjusted appropriately by “ON”.
Recording Setting White Balance Select the white balance setting. You can set the color tone to suit the light source. Select the Manual recording mode. You can either tap the icon, or select the item using the “0” “1” button and tap “SET”.
Recording Taking Close-up Shots (TELE MACRO) Tap “TELE MACRO”. You can take close-up shots of an object using the tele macro function. *The image is only an impression. If the icon is not displayed on the screen, tap 1 to scroll the screen. Select the Manual recording mode.
Recording Shooting under Water Locking the Screen Tap “MENU”. Perform the following settings to shoot underwater. Setting the White Balance to Underwater Mode Corrects the color when shooting underwater to record more natural images. Select from the following two settings depending on the color of the water at the shooting location.
Recording To cancel “SCREEN LOCK” Recording with Effects Tap the L button. You can add and record various effects to videos or still images. Once setting is done, you can easily record images that are suitable for each image. Type of Effect Description of Effect GRAINY Captures film-like monochrome images by...
Recording Recording Images Like an Old Black and White Photo Tap “GRAINY MONOCHROME”. (GRAINY MONOCHROME) Captures film-like monochrome images by increasing the contrast of mid- level brightness and emphasizing the rough grainy feel on the image. Open the LCD monitor. Tap L to exit the menu.
Recording Recording Food Images (FOOD) Tap “FOOD”. Captures food images such that the food looks appetizing even under fluorescent lighting in homes by changing the colors to warm-colors and deepening the colors. Open the LCD monitor. Tap L to exit the menu. Tap J to return to the previous screen.
Recording Recording Images of a Baby (BABY) Tap “BABY”. Captures a soft and gentle image by lightening the skin tone while retaining the reddish hue, enhancing the skin beautifying effect as well as smoothing the appearance of the skin. Open the LCD monitor. Tap L to exit the menu.
Recording Capturing Subjects Clearly (TOUCH PRIORITY Tap the desired setting. AE/AF) “TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. This function is available for both videos and still images. Open the LCD monitor. Focus and brightness will be adjusted automatically based on the tapped position (face/color/area).
Recording Memo : Reducing Camera Shake When “TOUCH PRIORITY AE/AF” is set, “FOCUS” will be set to “AUTO” automatically. When the image stabilizer is set, camera shake during video recording can Tap the selected position (face/color/area) again to cancel the setting. be effectively reduced.
Recording Recording at Intervals (TIME-LAPSE Setting Details RECORDING) Deactivates image stabilizer. b OFF This function enables the changes of a scene that occur slowly over a long Reduces camera shake under normal a ON period to be shown within a short time by taking frames of it at a certain shooting conditions.
Recording Time-Lapse Setting Tap to select a recording interval (1 to 80 seconds). The greater the number of seconds, the longer the recording interval. Setting Details Deactivates the function. 1SEC INTERVAL Takes a frame at 1-second intervals. Recorded videos will be played back at 30 times speed.
Recording Taking Group Shots (Self-timer) Tap “SELF-TIMER”. The 10-second self-timer is a convenient function for taking group photos. The 2-second self-timer is useful for preventing camera shake caused by pressing the shutter button. Memo : This function is available in still image recording mode. When shooting a photo using the self-timer function, use of a tripod is recommended.
Recording Recording Videos with Date and Time Select the type of clock with 0 or 1, and tap “SET”. You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) Open the LCD monitor.
Recording Checking the Remaining Recording Time Display the remaining battery power and the remaining recording time. Memo : The remaining battery power and the remaining recording time are estimates. The remaining recording time is displayed only during video mode. The remaining recording time is displayed for the recording media that is currently selected.
Recording time may differ depending on the shooting environment and usage. When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center.
Please be forewarned. Start playback from “PLAYBACK OTHER FILE” in the - JVC will not be responsible for any lost data. “PLAYBACK SETTING” menu. - In order for quality improvement, defective recording medium is subject to be analyzed.
Playback Normal Playback Operation Buttons for Video Playback Plays back the recorded videos. During Index Screen Display Open the LCD monitor. Display Description A Video/Still Image Switches between video and still image Mode modes. Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen.
Playback During Video Playback Display Description J Display Button Switches the display between full (m) and simple (n) with every tap of the button. Simple display: Some displays disappear automatically when the screen is not operated. Full display: Displays everything. The display button changes from n to m.
Playback Checking the Recording Date and Other Information Tap C. You can see the recording information of the recorded videos. Open the LCD monitor. Tap L to exit the menu. You can display the recording date and duration of the selected file. Tap A or B to select the video or still image mode.
Playback DIGEST PLAYBACK Tap to select a date for Digest Playback. You can play back a digest of recorded videos (Digest Playback). This is useful for checking the content of videos quickly. Open the LCD monitor. After selecting a date, tap “NEXT”. When “ALL”...
Playback PLAYBACK OTHER FILE Tap on the file to start playback. The management information of a video may be damaged if recording is not performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with defective management information.
Playback Playing Back Still Images Operation Buttons for Still Image Playback You can select and play back the recorded still images from an index screen During Index Screen Display (thumbnail display). Open the LCD monitor. Still images that are recorded continuously in high-speed or medium- speed will be grouped together.
Playback During Still Image Playback Slideshow Playback Still images can be played back in a slideshow. Tap I during still image playback to start the slideshow. When this unit is not operated, the operation buttons on the touch screen disappear automatically. Tap on the screen to display the operation “Operation Buttons for Still Image Playback”...
Playback Connecting to and Viewing on TV Connecting via the HDMI Mini Connector If you are using an HDTV, you can play back in HD quality by connecting to You can connect this unit to a TV for playback. The image quality on TV the HDMI mini connector.
Playback Memo : Operating in Conjunction with TV via HDMI Change the settings in “HDMI OUTPUT” according to the connection. Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable “ HDMI OUTPUT ” (A p. 90) allows linked operations with the TV to be performed.
Wiring specifications (for video/audio) of the 4-pole mini plug are described in the following. Connect to a TV. To purchase, consult your nearest JVC service center. When using the provided AV cable, attach the core filter provided with this Connect the adapter cable and AC adapter to this unit.
Editing Deleting Unwanted Files Deleting Selected Files Deletes the selected files. Delete unwanted videos and still images when the space in the recording Caution : media is running out. Deleted files cannot be restored. Doing so frees up more space in the recording media. “Deleting the Currently Displayed File”...
Editing Protecting Files Tap “SET”. Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 59) “Protecting/Releasing Protection of Selected Files” (A p. 60) Caution : When the recording media is formatted, even the protected files will be deleted.
Editing Protecting/Releasing Protection of Selected Files Tap on the files to protect or release protection of. Protects or releases protection of the selected files. Open the LCD monitor. P appears on the selected files. To remove P from a file, tap on the file again. I and P are displayed on the files that are already protected.
Editing Capturing a Still Image in the Video During Tap the A button. Playback You can capture still images of the scenes you like in the recorded videos. Open the LCD monitor. Memo : Still images are captured with a size of 1920×1080. Captured still images are stored in the media where the video is being played back from.
Editing Capturing a Required Part in the Video Tap the video to edit. (TRIMMING) Select the required part of a video and save it as a new video file. The original video remains in its existing location. Open the LCD monitor. Tap e to pause playback at the desired start point, then tap “A”.
Copying Dubbing Files to a Disc by Connecting to a Blu-ray Recorder You can dub videos in the high definition quality by connecting an AVCHD- compliant Blu-ray recorder to this unit via a USB cable. For details on creating the disc, refer to the instruction manual of your Blu-ray recorder. This operation cannot be completed if the remaining battery power is not enough.
To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage. http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Backing up of files using other softwares is not supported. Trouble with Using the Provided Software Everio MediaBrowser 4 Consult the customer service center below.
Copying Click “Properties” on the bottom bar to display. If a “Computer” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information. Windows Vista/Windows 7 Click the start button. Right-click Computer. Click “Properties”.
Copying Check the items with the table below. Windows 8/Windows 8.1 Windows Vista/Windows 7 Windows 8 64-bit Windows Vista 32/64-bit Windows 8 or Windows 8 Pro Home Basic or Home Premium (Pre-installed versions, desktop mode only) (Pre-installed versions only) Service Pack 2 Windows8.1 64-bit Windows 7 32/64-bit Windows8.1 or Windows8.1 Pro...
Copying Installing the Provided Software (Built-in) Perform the following operations on your computer. You can display the recorded images in calendar format and perform editing A Display “Apps”. using the provided software. (For Windows 8) Click the “Search” charm. (For Windows 8.1) Click F. This operation cannot be completed if the remaining battery power is not enough.
Copying Tap “PLAYBACK ON PC”. Click “Finish”. “Everio Software Setup” appears on the computer. Operations are to be performed on the computer after the screen Click “Quit”. switches. Perform the following operations on your computer. A Click “Open folder to view files” on the auto play dialog box, and then double-click “install.exe”.
Other Countries in Europe (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090 Homepage http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Delete unwanted videos before making backup. It takes time to back up many videos. “Deleting Unwanted Files” (A p. 58) Disconnect the USB cable to return to the recording or playback screen.
Copying Disconnecting this Unit from Computer Organizing Files After backing up your files, organize them by adding labels such as “Family Trip” or “Athletic Meet”. This is useful not only for creating discs, but for viewing the files too. Double-click on the Everio MediaBrowser 4 icon. The provided software starts up.
Select the files to copy to disc in order. (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090 Homepage http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Click “Settings” to select the disc type. Click “Select all” to select all the displayed files. After selecting, click “Next”. Set the title of the top menu of the disc.
* To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage. http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Use commercially-available software to create a Blu-ray disc. Use Everio MediaBrowser 4 Player to play back an AVCHD disc. Refer to the help file of the provided Everio MediaBrowser 4 software to operate.
Copying Backing Up Files Without Using Provided Software (Windows 8) Right-click “Computer” in the “Windows System Tool” menu to select Copy the files to a computer using the following method. the checkbox, and then click the “JVCCAM_SD” icon. This operation cannot be completed if the remaining battery power is not (Windows 7/Windows Vista) enough.
Copying List of Files and Folders Folders and files are created in the SD card as shown below. They are created only when necessary. Caution : When the camera and PC are connected by an USB cable, recorded media are read-only.
Copying Copying to Mac Computer Load image file to iPhoto. iPhoto launches automatically and videos recorded in the camera are Copy the files to a Mac computer using the following method. displayed. Load the necessary images. Caution : Images on the built-in memory and SD card are displayed separately. Switch between JVCCAM_MEM (built-in memory) and JVCCAM-SD This operation cannot be completed if the remaining battery power is not (SD card) displayed under “Devices”...
Settings Menu Operating the Menu Operating the Top Menu You can configure various settings using the menu. The following menu is available on this unit. Tap “MENU”. TOP MENU: Menu that contains all the items specific to the video recording, still image recording, video playback, and still image playback modes respectively.
Settings Menu RECORD SETTING Menu (video) FOCUS Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 29) *Displayed only in the manual recording mode. BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 30) *Displayed only in the manual recording mode.
Settings Menu WIND CUT Reduces the noise caused by wind. Setting Details Deactivates the function. Activates the function. AUTO Activate the function automatically. TIME-LAPSE RECORDING This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud.
Enables recording with 1 - 40x optical zoom and 41 - 80x digital zoom. (GZ-R310) 120x DIGITAL (GZ-R315) Enables recording with 1 - 40x optical zoom and 41 - 120x digital zoom. (GZ-R315) 100x DIGITAL (GZ-R310) Enables recording with 1 - 40x optical zoom and 41 - 100x digital zoom. (GZ-R310) 200x DIGITAL (GZ-R315) Enables recording with 1 - 40x optical zoom and 41 - 200x digital zoom.
Settings Menu MIC LEVEL Make the adjustments such that “MIC LEVEL” does not turn red. Setting Details Hides display of microphone input level. Shows display of microphone input level. MIC LEVEL SETTING Sets the microphone level. Make the adjustments such that “MIC LEVEL” does not turn red. Setting Details Increases the microphone input level.
Settings Menu RECORD SETTING Menu (still image) FOCUS Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 29) *Displayed only in the manual recording mode. BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 30) *Displayed only in the manual recording mode.
Settings Menu RECORDING EFFECT You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image. GRAINY MONOCHROME You can record images with a grainy black and white photo feel. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)”...
Settings Menu PLAYBACK SETTING Menu (video) DISPLAY DATE/TIME Sets whether to display the recording date and time during video playback. Setting Details Does not display the date and time during playback. Displays the date and time during playback. DIGEST PLAYBACK Plays back a digest of the recorded videos.
Settings Menu EDIT Menu (video) PROTECT/CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 59) “Protecting/Releasing Protection of Selected Files” (A p. 60) TRIMMING Select the required part of a video and save it as a new video file. The original video remains in its existing location.
Settings Menu PLAYBACK SETTING Menu (still image) SLIDE SHOW EFFECTS Sets the transition effects in slideshow playback. Setting Details SLIDE Switches the screen by sliding in from right to left. BLINDS Switches the screen by dividing into vertical strips. CHECKERBOARD Switches the screen by changing through a checkered pattern.
Settings Menu EDIT Menu (still image) PROTECT/CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 59) “Protecting/Releasing Protection of Selected Files” (A p. 60)
Settings Menu SETUP (video/still image) Mobile User Guide Displays the QR code to access the Mobile User Guide. The portal site appears when the QR code has been read correctly. Select the model name of your camera to display its Mobile User Guide. Memo : To read the QR code, a relevant application is required.
Settings Menu MONITOR BRIGHTNESS Sets the brightness of the LCD monitor. Setting Details AUTO Sets the brightness automatically to “4” when using outdoors and to “3” when using indoors. Brightens the backlight of the monitor regardless of the surrounding conditions. Sets to the standard brightness.
Returns all the settings to their default values. FIRMWARE UPDATE Updates the functions of this unit to the latest version. For details, refer to the JVC homepage. (When no program to update the software of this unit is available, nothing will be provided on the homepage.) http://www3.jvckenwood.com/english/support/index.html OPEN SOURCE LICENSES (recording only) Displays the open source software licenses that are used in this unit.
Settings Menu CONNECTION SETTINGS (video/still image) DISPLAY ON TV Displays icons and date/time on a TV screen. Setting Details Does not display icons and date/time on TV. Displays icons and date/time on TV. VIDEO OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. Setting Details Select this when connecting to a conventional TV (4:3).
Settings Menu USB CONNECTION MENU This menu appears when this unit is connected to a computer using an USB cable. PLAYBACK ON PC Displays videos recorded by this unit by using the Everio MediaBrowser 4. “Installing the Provided Software (Built-in)” (A p. 67) Saves videos recorded by this unit on your computer without using the provided software.
Names of Parts Right Side Bottom Side A Speaker A Cover Lock B Grip Belt B Tripod Mounting Hole Pass your hand through the grip belt to hold this unit firmly. “Tripod Mounting” (A p. 18) “Grip Adjustment” (A p. 8)
Names of Parts Top/Left/Rear Side Inside Terminal Cover A SD Card Slot Insert an optional SD card. A Lens B Reset Button The lens is protected by a protective glass cover. If the lens is dirty, use a commercially available lens blower to remove C HDMI mini connector any dust, and a commercially available cleaning cloth to wipe off any Connects to TV using an HDMI mini cable.
Names of Parts LCD Monitor A LCD Monitor Turns the power on/off by opening and closing. Enables self-portraits to be taken by rotating the monitor. “Using the Touch Screen” (A p. 11) “Names of Buttons and Functions on the LCD Monitor” (A p. 13) Caution : Do not press against the surface with force or subject it to strong impact.
Indications on the LCD monitor Common Recording Indications Video Recording A Video Mode A TOUCH PRIORITY AE/AF Switches between video and still image modes. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39) B Video Quality B Backlight Compensation “ VIDEO QUALITY ” (A p. 79) “Setting Backlight Compensation”...
Indications on the LCD monitor Still Image Recording Video Playback A Video Mode Switches between video and still image modes. A Still Image Mode B Video Quality Switches between video and still image modes. “ VIDEO QUALITY ” (A p. 79) B Image Size C Operation Indicator “...
Indications on the LCD monitor Still Image Playback A Still Image Mode Switches between video and still image modes. B Folder Number C File Number D Date/Time Displays the recording date and time. E Recording media F Battery Indicator “Checking the Remaining Recording Time” (A p. 45) G SILENT MODE “Using the Silent Mode”...
-10°C to 0°C, this will cause the remaining recording time to shorten. When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center.
Troubleshooting Power supply Recording Unable to turn on the power. Recording cannot be performed. The camera does not turn on if the remaining battery power is low. Check the A / B button. In this case, charge the battery for more than 40 minutes before turning on “Top/Left/Rear Side”...
Troubleshooting SD Card Playback Cannot insert the SD card. Sound or video is interrupted. Make sure not to insert the SD card in the wrong direction. Sometimes playback is interrupted at the connecting section between two “Inserting an SD Card” (A p. 9) scenes.
Troubleshooting Editing/Copying Computer Unable to delete file. Unable to copy files to the computer’s HDD. Files (videos/still images) that are protected cannot be deleted. Release If the provided software Everio MediaBrowser 4 is not installed, some protection before deleting the file. functions may not work properly.
Troubleshooting Screen/Image Other Problems The LCD monitor is difficult to see. The buttons on the touch screen do not work. The LCD monitor may be difficult to see if used in bright areas such as under Tap the buttons on the touch screen with your fingers. direct sunlight.
Reset button to reset this unit. “Resetting this Unit” (A p. 98) “Resetting this Unit” (A p. 5) If these operations won’t solve the problem, contact your JVC dealer or the FORMAT ERROR! JVC service center. Reset this unit.
Troubleshooting THIS FILE IS PROTECTED Switch off the “PROTECT/CANCEL” function in the “EDIT” menu. “Protecting Files” (A p. 59) CHECK CARD'S WRITE PROTECTION SWITCH Set the write protect switch of the SD card to off. INSUFFICIENT AVAILABLE SPACE Delete files, or move files to a computer or other devices. Replace the SD card with a new one.
Maintenance Perform regular maintenance of this unit to enable it to be used for a long time. Caution : Be sure to detach the AC adapter and power plug before performing any maintenance. Camcorder Wipe this unit with a dry, soft cloth to remove any dirt. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent.
Zoom (during video Optical zoom: Up to 40x recording) Dynamic zoom: Up to 60x Digital zoom: Up to 100x (GZ-R310) Digital zoom: Up to 200x (GZ-R315) Zoom (during still Optical zoom: Up to 40x image recording) LCD monitor 3.0” Wide, 230,000 dots, color LCD...
Specifications Still Image AC Adapter (AC-V10E) Item Details Item Details Recording format JPEG standard Power supply AC 110 V to 240 V, 50 Hz/60 Hz Extension .JPG Output DC 5.2 V, 1 A Image Size (16:9 aspect ratio) Allowable operating 0°C to 40°C (Recording pixel 1920 pixels x 1080 pixels (2M)
Trademarks Trademarks AVCHD and AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. HDMI (High-Definition Multimedia Interface) and HDMI logo are either registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.