Capturing Still Images During Video Recording; Taking Still Images In Auto Mode - JVC GZ-N1 Detailed User Manual

Recording
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
- In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.
Memo :
Check the remaining recording time in the media before you start shooting.
0
If there is not enough space, move (copy) the data to a computer or disc.
When there are many files in the media, it may take time for them to be
0
displayed on the playback screen. Wait for a while as the POWER/
ACCESS lamp blinks, indicating normal operation.
Do not forget to make copies after recording!
0
Recording stops automatically as it cannot be performed for 12 or more
0
consecutive hours according to specifications.
(It may take some time to resume recording.)
Up to 4GB per video file can be recorded. File recorded using long
0
recordings that exceeds 4GB is split and recorded into several video files.
You can connect this unit to the AC adapter to record for long hours
0
indoors.
Depending on the subject and shooting conditions, recording may not be
0
performed properly even in the Intelligent Auto mode.
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.

Capturing Still Images During Video Recording

Still images can be captured by tapping the A button while in the video mode
(standby or recording).
"PHOTO" lights up on the screen when a still image is being captured.
0
The still images captured during video recording are saved to the
0
destination set in "REC MEDIA FOR IMAGE".
Memo :
The size of the still image that is captured in the video mode is 1,920 x
0
1,080.
Operation is invalid under the following conditions:
0
- when menu is being displayed
- when remaining recording time or battery power is being displayed
- when any functions in "TIME-LAPSE RECORDING", "RECORDING
EFFECT" or "DATE/TIME RECORDING" is set
20

Taking Still Images in Auto Mode

You can record without worrying about the setting details by using the
Intelligent Auto mode.
1
Open the LCD monitor.
Check if the recording mode is B.
0
If this unit is in the video mode A, tap the D (video/still image) button
0
on the touch screen to switch to the still image mode B.
2
Check if the recording mode is P Intelligent Auto.
If the mode is H Manual, tap H on the recording screen to display
0
the mode switching screen.
Tap P to switch the recording mode to Intelligent Auto.
3
Press the START/STOP button.
PHOTO lights up when a still image is being captured.
0
Memo :
Depending on the subject and shooting conditions, recording may not be
0
performed properly even in the Intelligent Auto mode.
Memo :
You can also use the A button on the touch screen to record.
You can adjust the focus by using the A button.
0
1
Press and hold the A button on the touch screen until the focus is
adjusted.
2
Remove your finger from the button to release the shutter.
Available only when "SHUTTER MODE" is set to "RECORD ONE SHOT".