Playing Back With A Dvd Writer - JVC GZ-N1 Detailed User Manual

Copying
11
Tap "EXECUTE".
When "INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
0
EXIT" appears, change the disc.
12
Tap "OK" when "COMPLETED" is displayed.
13
Turn off the DVD writer, then remove the USB cable.
Caution :
Do not turn off the power or remove the USB cable until copying is
0
complete.
Files that are not on the index screen during playback cannot be copied.
0
Special files cannot be copied either.
All DVDs will be finalized automatically.
0
Files cannot be added to the DVD-R/DVD-RW later.
Memo :
To check the created disc, refer to ""Playing Back with a DVD Writer"
0
(A p. 78) ".
"Playing Back with a DVD Writer" (A p. 78)
78

Playing Back with a DVD Writer

You can play back the DVDs created on this unit.
1
Connect this unit to the DVD writer and TV.
(If this unit is not connected to a TV, images can be played back on the
LCD monitor of this unit.)
"Preparing a DVD Writer (CU-VD3)" (A p. 72)
"Preparing a DVD Writer (CU-VD50)" (A p. 72)
"Connecting to and Viewing on TV" (A p. 54)
Insert the DVD to play back into the DVD writer.
0
2
Tap "PLAYBACK" in the "BACK-UP" menu.
An index screen (thumbnail display) of the videos in the disc appears.
0
Tap the A icon to switch between the video and still image modes.
0
3
Tap on the file to start playback.
Tap "J" to return to the "BACK-UP" menu.
0
For details on video playback, refer to ""Operation Buttons for Video
0
Playback" (A p. 46) ".
"Operation Buttons for Video Playback" (A p. 46)
To exit playback, stop playback and close the LCD monitor to turn off
0
this unit. Then, disconnect the USB cable.
Memo :
To play back the recorded image on TV, connect this unit via the HDMI
0
mini cable or the AV Cord while this unit is connected to the DVD writer.
"Connecting via the HDMI Mini Connector" (A p. 54)
"Connecting via the AV Connector" (A p. 56)