Setting White Balance - JVC EverioR GZ-R495 Detailed User Manual

Setting White Balance

You can set the color tone to suit the light source.
1
Select the Manual recording mode.
≪PLAY
.
If the mode is P Intelligent Auto, tap P on the recording screen
0
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
intelligent AUTO
.
2
Tap "MENU".
≪PLAY
.
The top menu appears.
0
3
Tap "RECORD SETTING".
TOP MENU
RECORD
SETTING
OFF
CONNECTION
SETTINGS
.
4
Tap "WHITE BALANCE".
RECORD SETTING
.
Tap L to exit the menu.
0
Tap J to return to the previous screen.
0
MANUAL
REC MENU
SETUP
5
Select the white balance setting.
AUTO
SET
.
You can either tap the icon, or select the item using the "0" "1" button
0
and tap "SET".
The White Balance icon appears on the screen upon completing the
0
setting.
Setting
n AUTO Adjusts automatically to the natural colors.
l MWB Use this when the problem of unnatural colors is
not resolved.
m FINE Set this when shooting outdoors on a sunny day.
p CLOUD Set this when shooting on a cloudy day or inside a
shade.
o HALOGEN Set this when shooting under illumination such as
a video light.
q MARINE:BLUE Set this when shooting in deep waters (water
appears blue).
Set this when shooting in shallow waters (water
r
MARINE:GREEN appears green).
Using MWB
1
Point the cursor to "MWB" using the "0" "1" button.
2
Hold a sheet of plain white paper in front of the lens so that the white
paper fills the screen, tap and hold the "SET" button.
3
o blinks, release your finger after the setting screen disappears.
You can also tap and hold the "MWB" icon to perform the setting.
0
Memo :
The setting will not change if "MWB" is being tapped too fast (less than 1
0
second).
Recording
Details
31