Parking The Machine - IHI 15VX Operation Manual

At the end of a day's work, following steps should be
observed as the established machine shut-down
procedure:
Machine Stopping
Park on a level surface, if necessary to park on a
grade, block the tracks securely.
1. Move engine throttle lever forward to reduce the
engine speed.
2. Release the travel lever to stop the machine.
3. Lower the bucket to the ground and apply slight
down pressure.
4. Move the control shut-off lever to the LOCKED
position.
Freezing Conditions
If freezing temperature are expected, each crawler
frame should be cleaned of mud and dirt and the
machine parked on wood planks.
Engine Stopping
1. Operate the engine at LOW IDLE for five minutes.
This gives the engine a chance to cool off
gradually before they are stopped.
2. Turn the start switch key to OFF. Remove the key.
Leaving the Machine
1. Use the steps and handhold, use both handles
and face the machine, when dismounting.
2. Inspect the entire machine for leaks, loose
connections, signs of wear, crack etc. Report any
signs of trouble discovered during this inspection.
3. Close and lock the doors.
To stop the engine in emergency, turn the start switch
key to "OFF" position.
OPERATION

2-17 PARKING THE MACHINE

2-18 EMARGENCY ENGINE STOP
2 – 29
Wood planks
OFF ON
START SWHITCH