IHI 15VX Operation Manual page 15

NEVER ALLOW ANYONE TO RIDE THE
ATTACHMENT OR THE LOAD.
NEVER attempt to lift personnel using the
attachment since the machine is designed to
excavate and move NOT personnel BUT
materials. If you lose control of the
attachment in such a trial, the personnel will
be dropped down, which is likely to occur.
NEVER LIFT, SWING, OR LOWER A LOAD
OVER ANYONE OR ALLOW AJNYONE TO
RIDE TEE ATTACEMENT OR THE LOAD.
PROVIDE ADEQUATE TAILSWING
CLEARANCE.
Confirm that there is a sufficient clearance
around the machine for swinging operation.
The operator tends to be unconscious of the
area behind the machine. Before tailswing,
make sure that there no personnel or objects
in such area.
CAUTION
ALWAYS check for personnel or objects
around the machine before swinging.
NEVER SWING OVER PERSONNEL
Be sure that no personnel are working
around the machine before swinging.
Pay attention to invisible workers in a trench
or pit in particular. Follow the signal person's
direction not to swing over such workers.
SAFETY
1 – 10