IHI 15VX Operation Manual page 48

14
Travel Lever
* Normal traveling is when the drive sprocket
are under the rear of the machine. Blade are
under the front of the cab. Reverse traveling
is when the cab is over the sprockets. Both
the directional and traveling functions will be
reversed.
* Always travel with sprockets under the rear of
the machine.
Forward Direction Travel :
Move the both travel levers forward to move the
machine forward direction.
Stop :
Release the travel levers to stop the machine and
apply the brakes.
Reverse Direction Travel :
Move the both travel levers rear to move the
machine reverse direction.
Refer to Traveling the Machine section of this
manual.
15
High Speed Travel Pedal
* NEVER high speed travel on a grade or
loading and unloading the machine.
* When control shut-off lever is locked, does
not change to high speed travel.
Low Speed Travel
Release the pedal to low speed travel. Select the
LOW speed travel when driving on rough or soft
surface. Low is also recommended for loading or
unloading from a truck.
High Speed Travel
During push down the pedal to shift the high speed
travel. Select the HIGH speed travel when driving
on a hard even surface.
OPERATION
CAUTION
CAUTION
2 – 8
Forward
Travel
Forward Travel
BLADE
15
High Speed Travel
(push down)
Reverse
Travel
SPROCKET
Reverse
Travel