IHI 15VX Operation Manual page 49

16
Blade Lever
The blade falls with its self-weight if pushing this
lever to forward when the engine stops. Be
careful.
Blade raise : Move the lever back to raise the
blade.
Blade lower : Move the lever forward to lower the
blade.
17
Boom Swing Pedal
ALWAYS locked pedal when is not in use.
Boom swing right :
Push down right on the pedal to swing the boom
to the right.
Boom swing left :
Push down left on the pedal to swing the boom to
the left.
18 Operator's Seat
* Seat adjustment should be checked at the
beginning of each shift or when changing
operator.
* Lower the bucket on the ground, stop the
engine and then make adjustment.
Seat Adjustment
Seat position can be adjusted forward or
backward and seat back tilt. Select the desired
position to allow full pedal and lever travel.
To Adjust the Seat Forward or Backward.
Pull up and hold lever
desired position. Release the lever to hold the
seat in the selected position.
To Adjust the Seat Back Tilt.
Pull up and hold lever
the desired position. Release the lever to hold the
seat in the selected position.
To Adjust the Seat Suspension.
Turning nob clockwise increases suspension
stiffness and turning it counterclockwise
decreases suspension stiffness.
OPERATION
CAUTION
CAUTION
CAUTION
and move the seat to the
and tilt the seat back to
2 – 9
Blade lower
16
Unlocked
Swing Right
Swing Left
Blade raise
Pedal Lock
Locked