Table of Contents
Advertisement
WARNING
Fire, Explosion and Electrocution
Hazard
Improper grounding, poor air ventilation, open
flames, or sparks can cause a hazardous condi-
tion and result in fire, explosion, or electric shock.
To help prevent these hazards:
•
Sprayer should be grounded through an elec-
trical outlet as follows:
- Only use grounded electrical outlets.
- Only use 3-wire extension cords.
- Grounded prongs must be intact on sprayer
and extension cords.
•
Keep electrical connections and inside of
shroud dry.
•
Avoid contact with power lines.
•
Use outdoors or in well-ventilated area.
•
Sprayer should be at least 6m (20 ft) from gun
when spraying or flushing.
•
If there is any static sparking while using
equipment, stop spraying immediately.
Identify and correct the problem.
•
Avoid all ignition sources such as pilot lights,
cigarettes and plastic drop cloths (static arc
hazard).
•
Do not plug in or unplug power cords or turn
lights on or off in spray area.
•
Only use Graco airless paint hoses.
3Z9478A
•
.!
.!
.!
•
•
•
•
7
31!
•
•
•
!Hsbdp!
•
Warning
!
!
!
3
Advertisement
Table of Contents
