Table of Contents
Advertisement
When using the DC adapter for
･
charging, do not turn off the vehicle
engine.
Doing so may cause the vehicle battery run out.
When you use the power outlet with a
･
mechanism to prevent the plug from
being removed, follow the instructions
on the outlet's user's manual.
Do not subject the equipment to a
･
strong impact. Do not deform the
charging jack.
Doing so may cause malfunction.
Magnet is used for magnet connector
･
that is between contacts of the desktop
holder. Make sure that any iron sands or
metal objects (clips etc.) are not
adhered before attaching the terminal.
Remove the foreign objects with a soft
cloth etc., if any.
Do not put a magnetic card such as a
･
cash card, commuter pass, etc. closer to
the magnet connector that is between
contacts of the desktop holder.
Magnetism of the desktop holder may
affect the magnetism of the card.
Be sure to install the supplied
･
attachment to the desktop holder for
charging. The terminal cannot be
charged on the desktop holder without
attachment. Attachment 34A is
attached to the Desktop Holder by
default. Attachment 34B only supports
terminal covers with "
(Compatible with genuine desktop
holders)" mark (commercially available)
and the terminal can be charged on the
desktop holder with a compatible cover
attached.
docomo nano UIM card precautions
■
Do not use unnecessary force to insert/
･
remove the docomo nano UIM card.
Note that DOCOMO assumes no
･
responsibility for any malfunctions
resulting from inserting the docomo
nano UIM card into another IC card
reader/writer and using it.
Always keep the IC portion clean when
･
you use the card.
Clean the terminal with a dry soft cloth
･
(such as used for cleaning eyeglasses).
Note down the information registered
･
in the docomo nano UIM card on a
separate sheet and keep it for future
reference.
純正卓上ホルダ対応
Contents/Precautions
20
Advertisement
Table of Contents
