Sony xperia z3 compact SO-02G Instruction Manual page 20

Table of Contents

Advertisement

Clean the terminals occasionally with a
dry cotton swab.
If the jack is soiled, connection gets worse and it
may cause power to be turned off or insufficient
battery charge, so clean the jack with a dry
cotton swab etc. When cleaning, be careful not
to damage the terminals.
Do not leave the terminal near the air
conditioning vent.
Extreme temperature changes may produce
condensation and corrode the internal parts of
the terminal, causing it to malfunction.
Make sure to use the terminal etc.
without excessive force.
If you put the terminal in a bag full of items or sit
down with the terminal in the pocket of your
cloth, it may damage the display, internal circuit
board, etc. and cause malfunction.
If doing so while the external device is connected
to the microUSB jack or headset jack, it may
cause damage or malfunction.
Do not rub or scratch the display with
metal.
The display may get scratched and it may cause
malfunction or damage.
Read the users manuals supplied with
individual optional devices.
The terminal precautions
Do not press touch screen surface
forcibly, or not operate with a sharp-
pointed objects such as nail, ballpoint
pen, pin, etc.
Doing so may cause damage of touch screen.
Do not use the terminal in extremely hot
or cold places.
Use the terminal where the temperature ranges
between 5
and 40
use in a bathroom etc. when temperature is
above 36
) and humidity ranges between 45%
and 85%.
Using the terminal near land-line phone,
television or radio may cause
interference in these electric appliances.
Make sure to move far away from them
when using the terminal.
Note down the information saved in the
terminal in a separate note and keep it
safely.
Under no condition will DOCOMO be held liable
for any damaged or lost data saved in the
terminal.
Do not drop or give a strong impact to
the terminal.
Doing so may cause malfunction or damage.
Do not insert the plug of the external
device into the microUSB jack or
headset jack at the slant or pull it
obliquely while connecting.
Doing so may cause malfunction or damage.
The terminal could become warm while
in use and charging. This condition is
not abnormal. You can continue using
the terminal.
Contents/Precautions
(limited to the temporary
18

Advertisement

Table of Contents
loading

Table of Contents