Table of Contents
Advertisement
Bluetooth function
■
The terminal cannot be connected to a
Bluetooth communication device/A
Bluetooth communication device cannot
be found from the terminal.
Make Bluetooth communication device
･
(commercial item) registering stand-by
state and then register the device on the
terminal. If you delete already registered
device and register the device again as a
new device, delete the registrations on
both Bluetooth communication device
(commercial item) and the terminal and
then perform registration of the devices.
P.177
→
Calls cannot be made from the terminal
connecting to external device such as car
navigation or handsfree device.
If calls are made several times when the
･
other party does not answer or is out of
service, the call to this number may be
disabled. In this case, turn terminal off and
on.
Map/GPS
■
Cannot set AUTO-GPS service
information.
Check if the battery level is low and AUTO-
･
GPS function stops.
If AUTO-GPS stops due to "Low-power
operation settings", AUTO-GPS service
information cannot be set. In this case, set
"Low-power operation settings" to "Not
suspend" or charge the battery.
P.160
Check if "AUTO-GPS operation settings" is
･
marked.
P.160
→
P.33,
→
200
Appendix/Index
Advertisement
Table of Contents
