Table of Contents
Advertisement
Making pair setting for the
terminal and Bluetooth device
To connect the terminal and Bluetooth
device, pair them first.
Once paired, the setting with the Bluetooth
･
device is saved.
For make pair setting, entering passcode (PIN)
･
may be required. Passcode (PIN) of the
terminal is "0000". If you cannot make pair
setting when you enter "0000", see the
documentation of your Bluetooth device.
From the Home screen,
1
u
[Settings]
[Bluetooth]
for devices].
Tap the Bluetooth device name to
2
u
pair
Check a passkey on the
"Bluetooth pairing request"
u
screen
[Pair].
When pairing request is sent from a
■
Bluetooth device
Check a passkey on the "Bluetooth pairing
request" screen, then tap [Pair].
❖ Information
Make sure that the Bluetooth function and Bluetooth
･
detection function of the target device are on.
To unpair, tap
for the Bluetooth device to be
･
u
unpaired
[Unpair].
Connecting the terminal with
Bluetooth device
1
2
❖ Information
Tap
･
to check the status of the Bluetooth device or
change the settings.
u
Up to 7 devices can be connected at the same time.
･
u
[Search
Depending on profile, operation may not be correct
or number of devices that can be connected at the
same time may be different.
Disconnecting a Bluetooth device
1
2
3
From the Home screen,
u
[Settings]
[Bluetooth]
for devices].
Tap the name of Bluetooth device
you want to connect.
for the name of connected Bluetooth device
From the Home screen,
u
u
[Settings]
[Bluetooth].
Tap the connected Bluetooth
device name.
[OK].
To reconnect, tap the Bluetooth device
･
name.
Data communication
u
u
[Search
177
Advertisement
Table of Contents
