When pointing
・
sending/receiving may fail. In such case,
operate again to send/receive.
The terminal does not communicate with all
・
NFC devices.
For notes when holding over the other
・
device, (P.109).
Enabling NFC Reader/Writer,
P2P function
From the Home screen,
1
u
[Settings]
[NFC/Osaifu-Keitai settings]
2
"Reader/Writer, P2P"
"Reader/Writer, P2P" and "Android
・
Beam" are marked.
appears on the status bar.
・
❖ Information
While "NFC/Osaifu-Keitai lock" is set, the NFC Reader/
・
Writer, P2P function cannot be turned on.
marks to each other,
u
[More...].
u
Mark
u
[OK].
Sending/Receiving data by
one-touch function
If you use the Android Beam with an Android
device with NFC, simple operations allow you
to send or receive images, music, photos or
videos taken with the terminal.
Turn on Reader/Writer, P2P function in
・
advance (P.179).
Sending data
Display data to send on the screen.
1
Face the
marks on the terminal
2
and the receiver's terminal each
other.
"Touch to beam" appears.
・
Tap the screen that has become
3
small.
Data communication
179