Selecting The Air Conditioning Mode - Dometic FRESHLIGHT FL1600 Operating Manual

Dometic FreshLight
9.5

Selecting the air conditioning mode

I
NOTE
• Before selecting the "Ventilation" ( ) air conditioning mode, you
have to open both blinds completely.
• In the "Ventilation" ( ) mode, the blower only starts once the
ventilation flap (fig. 5 1, page 5) is open. This can take a few
minutes.
• When the roof air conditioner is switched to the "Heating" (
mode, it takes approx. 30 seconds before heating begins. During
this time, the status LED on the control panel flashes and the cooling
cycle is reversed.
➤ Select the air conditioning mode of your choice using the MODE key, see "Air
conditioning modes" on page 19.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The roof air conditioner is switched to the selected air conditioning mode.
EN
Operating the roof air conditioner
)
25