Rear Cover - ELNA 6001 Service Manual

PDFMAILER.DE
TO REMOVE
1. Remove the face cover, top cover, belt cover and bed cover. (See pages 8, 9 and 10.)
2. Loosen the setscrews (A), (B), (C) and (D).
2. Remove the cap, setscrew (E) and set screw (F).
3. Remove the rear cover while pulling it toward you and pushing it to the left.
4. (Unhook the projection (G) and twist the rear the cover to clear the presser bar lifter area.)
TO ATTACH
1. Reverse this procedure.

REAR COVER

12