Filter System - Miele HG05 Operating Instructions Manual

Cleaning and care

Filter system

The filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects.

This dishwasher must not be
used without all the filters in place!
Collection of coarse soil may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on use.
The message Check filters
the display after every 50 program cy-
cles (factory default setting).
You can set the interval for the "Check
filters" message to appear to a value
between 30 and 60 program cycles (see
"Settings menu - Check filters").
 Check the filter system.
 Clean it if necessary.
 Then confirm the message with
The message will disappear.
The display will change to show the
program selection menu.
80
will appear in
OK .
Filter system
 Turn the dishwasher off.
 Turn the handle counter-clockwise to
release the filter system .
 Lift the filter system out of the dish-
washer . Remove any coarse parti-
cles and rinse the filter well under
running water.
Use a nylon brush if necessary.

Ensure that coarse soil does not
get into the circulation system and
cause a blockage.