Energy Management; At The End Of The Program - Miele HG05 Operating Instructions Manual

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes af-
ter the last time a button has been
pressed or after the end of a program.
 Press the  sensor button to turn the
dishwasher back on.
The dishwasher will not turn off auto-
matically if the time of day display has
been activated (see "Settings menu -
Time of day").
The dishwasher will not turn off while
a program is running, during the delay
start period, or if there is a fault.

At the end of the program

The buzzer might sound at the end of
the program.
The program has finished when
finished appears in the display and the
door has opened slightly (if applicable).
In the QuickIntenseWash
door will not open until a few minutes
after the program has finished.
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
You can now empty the dishwasher.

If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise steam from the dish-
washer could damage the edge of
the counter because the fan is no
longer running.
Operation
Prog.
program, the
51