Miele HG05 Operating Instructions Manual page 71

If the time of day display has been
switched off (see "Settings menu,
Time"), the display message will go
out after 10 minutes following activa-
tion of a delay start time.
To switch the display message back
on for a few minutes, press the 
sensor.
If you open the door and then close it
again before you have started a pro-
gram with the remote control, the
message Press Start to continue
pears in the display. Press the Start
button to reactivate the
function.
If you now do not wish to operate the
dishwasher remotely with the
Miele@mobile app, you can cancel the
MobileControl function.
 Select and confirm with
Cancel
ap-
MobileControl
.
Yes
Module settings
We recommend connecting your dish-
washer to your WLAN network using
the Miele@mobile app or via WPS.
If you would rather set up the connec-
tion to your router yourself, or you have
a special network configuration, you
can enter the relevant settings with the
necessary technical knowledge.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can re-
store the factory default settings on
your WLAN module. Any settings which
do not affect Miele@home will remain
unchanged.
 Select
Restart w. default settings
confirm with
OK
Please wait... will appear in the display.
The message Restart successful
pear in the display after a few minutes.
 Confirm the message with
The WLAN module factory default set-
tings have been restored.
If the factory default settings were not
restored to your WLAN module, repeat
the instructions above.
Settings menu
and
.
will ap-
OK .
71