Advertisement
One-Way Air Valve
(Found only on DKS)
Tether the valve cap
onto the base of the
seat by stretching the
retainer ring with your
fingers to fit over the
groove in the base.
Stretch the ring if it is
too tight.
An A41 Large
Bellows Foot Pump
is included with the
Deluxe Package to
inflate the DKS seat.
Use the wide, flat
adapter to inflate the
seat.
Insert the wide, flat
adapter into the
valve and inflate the
chambers.
SeaEagle.com/Instructions
Kayak Paddle
(OPTIONAL)
The asymmetrical
spoon blade design
of this kayak paddle
will allow for a smooth
entry and an even pull,
maximizing the power
from each stroke. They
will also require less
gripping force.
Put the shaft together
first. Insert the shaft
piece with the button
into the piece with three
holes. Lock the button
in the middle hole.
Next, slide the drip
guards up the shaft to
about an inch above
the button hole. Insert
the blades into the shaft
and adjust until the
button locks the blade
in place.
The additional holes
in the shaft are for
"feathering" the blades.
Blades can be offset
45° from each other.
This makes paddling
into a stiff breeze easier
as the blade that is
not in the water will be
able to slice through
the wind with little
resistance.
8
Advertisement
