Table of Contents
Advertisement
Battery Replacement
1.
If the Battery Check indicates low battery power, the 6 AA batteries must be replaced.
2.
Remove the test leads and turn the meter over.
3.
Unsnap the tilt stand from the rear of the meter.
4.
Remove the 4 Phillips head screws that secure the battery cover.
5.
Remove the battery compartment cover
6.
Replace the batteries, observing correct polarity.
7.
Replace the battery compartment cover and secure the 4 screws.
8.
Re-attach the tilt stand.
9.
You, as the end user, are legally bound (Battery ordinance) to return all used batteries and
accumulators; disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your community
or wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
6
380320-en-GB_V1.5 9/15
Advertisement
Table of Contents
Need help?
Do you have a question about the 380320 and is the answer not in the manual?
Questions and answers