Congratulations on your purchase of the Extech 380320 Analog High Voltage Megohmmeter. The 380320 features three Insulation test ranges with a live circuit indicator, as well as low resistance and AC voltage measurements. The Power Lock On feature allows hands-free operation. This professional meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Red: Megohmmeter Scale: Multiply reading by 0.5 (for 250V range), 1 (500V), 2 (1000V) Green: Low Resistance Scale (0 to 3) Green: Resistance Scale (0 to 500 Blue: AC Voltage Measurement Scale (0 to 600V) BATT GOOD indicator LIVE CIRCUIT Indicator LED 380320-en-GB_V1.5 9/15...
Readings displayed other than the readings described above are indicative of a test lead problem. The test leads must be replaced before using the meter. Failure to do so could result in damage to equipment and electrical shock. 380320-en-GB_V1.5 9/15...
Page 5
Set the Rotary switch to the OFF/VAC position. Connect the red test lead to the V input and the black lead to the COM input. Connect the other end of the test leads to the circuit under test. Read the voltage value on the meter. 380320-en-GB_V1.5 9/15...
You can hand over your used batteries / accumulators at collection points in your community or wherever batteries / accumulators are sold! Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the end of its lifecycle 380320-en-GB_V1.5 9/15...
Need help?
Do you have a question about the 380320 and is the answer not in the manual?
Questions and answers