Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext.
2500V DC 0 to 125 GΩ 5000V DC 1.6 mA 0 to 250 GΩ Meter Description Test lead jacks compartment Dot Matrix Display Voltage test buttons ON / TEST button Battery compartment is located on bottom of unit 380375 V1.5 3/04...
The meter automatically discharges the system at the end of the test. The test ends when one of the following occurs. After approximately 10 seconds in the Enersave mode. After approximately 100 seconds in the continuous mode. When the red ON / TEST button is pressed. 380375 V1.5 3/04...
Page 5
During discharge the beeper will sound and, when completely discharged, the HOLD icon appears on the display. Auto OFF The meter will automatically turn off after approximately 30 minutes of operation. 380375 V1.5 3/04...
Page 6
This also applies to DC Generators. Testing Single Conductor Cables Completely disconnect the cable Core Insulation Sheath Covering under test from its source and destination. Connect the test leads to the cable as shown at right. EARTH GUARD LINE 380375 V1.5 3/04...
Page 7
Low voltage winding to high voltage winding and ground High voltage winding to low voltage winding (pictured below) High voltage winding to ground Low voltage winding to ground Connect the BLACK lead here Connect the RED lead here 380375 V1.5 3/04...
Need help?
Do you have a question about the 380375 and is the answer not in the manual?
Questions and answers