Tuner Operations
Tuning to radio stations
1
Press SOURCE button until
"TUNER FM" appears on the display
panel.
2
Press 3 / 4 briefly on the remote.
➜
The display panel will show "SEARCH"
until a radio station with sufficient signal
strength is found.
3
2
Repeat step
if necessary until you find
the desired radio station.
4
To tune to a weak station, press S /
T briefly and repeatedly until an
optimal reception is found.
G
If the FM station reception is weak, press
AUDIO to switch the FM mode from
stereo to mono.
42
001-053-hts8000-37-Eng14a
Presetting radio stations
You can store up to 40 FM preset radio
stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no valid frequency is detected during
Plug and Play,"CHECK ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all
available radio stations automatically.
1
For first time setup, press SOURCE
to select TUNER mode.
➜
appears.
2
Press and hold 2; (PLAY PAUSE) until
"INSTALL TUNER" appears on the
display panel.
➜
strong signal strength will be stored
automatically.
➜
station will play.
42
AUTO INSTALL..
1
SUBWOOFER
INSTALL TUNER
2
"AUTO INSTALL PRESS PLAY"
All the available radio stations with
Once complete, the last tuned radio
7/2/05, 10:21 AM
DVD system's
display panel
3139 115 2xxx1