IMPORTANT!
–
Make sure the FM and MW
antennas are connected.
Tuning to radio stations
1
Press TUNER on the remote (or press
SOURCE control on front panel) to
select "FM" or "MW".
2
Press 3 / 4 briefly on the remote.
➜
"SEARCH" appears.
➜
The next radio station will tune
automatically.
3
To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
Presetting radio stations
You can store up to 20 FM and 10 MW
preset radio stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA"
appears.
001-039_LX2610_93_Eng1
Using the Plug and Play
Plug and Play allows you to store all
available radio stations automatically.
AUTO INSTALL PRESS PLAY
1
For first time setup, on the DVD system
press SOURCE or TUNER to select
TUNER mode,
"AUTO INSTALL PRESS PLAY"
appears.
2
Press ÉÅ on the front panel to start
installation.
➜
"INSTALL TUNER" appears.
➜
All previously stored radio stations will
be replaced.
➜
Once completed, the last tuned radio
station will play.
➜
FM followed by MW bands will be
stored.
Automatic presetting
You can start the automatic presetting
from a selected preset number.
33
Tuner Operations
PLAY/PAUSE
OPEN/CLOSE PLAY/PAUSE
STOP
PREV
NEXT
IR
SOURCE
DVD system's
display panel
FM
1
2
98:00
AUTO
3
3139 115 23601
12/10/2004, 2:01 PM
VOLUME
33