Tuner Operations; Tuning To Radio Stations; Presetting Radio Stations; Using The Plug And Play - Philips MX5600D/99 Quick Use Manual

IMPORTANT!
– Make sure the FM and AM antennas
are connected.
– The TUNING button on the front
panel is used to toggle between
frequency tuning and preset tuning.
When in preset tuning mode, pressing
S / T buttons on the front panel
will change the preset number.
Otherwise, pressing S / T will
change the radio frequency.

Tuning to radio stations

1
Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
"FM TUNER" or "AM TUNER. "
2
Press and hold S / T on the remote until
the frequency indication starts to change, then
release.
➜
The next radio station will tune automatically.
➜
lights up for FM stereo reception.
3
To tune a weak station, press S / T briefly
and repeatedly until an optimal reception is
found.
G If you use S / T on the front panel for
frequency tuning, make sure the system is in
frequency tuning mode. If not, press TUNING.
➜
"FREQ MODE" appears.

Tuner Operations

Presetting radio stations

You can store up to 40 preset radio stations in
the memory, starting from FM and followed by
AM bands.
Notes:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo frequency is detected during Plug
and Play, " CHECK ANTENNA " appears.

Using the Plug and Play

Plug and Play allows you to store all available
radio stations automatically.
AUTO INSTALL - PRESS PLAY
DVD
SC CHANGER
MEDIA SLOT
1
Connect the system to the power supply,
"AUTO INSTALL - PRESS PLAY" appears.
OR
In Eco Power standby/standby mode,
press and hold É Å on the front panel until
"AUTO INSTALL - PRESS PLAY" appears.
2
Press É Å on the front panel to start
installation.
➜
"INSTALL TUNER" appears.
➜
All previously stored radio stations will be
replaced.
➜
Once completed, the last tuned radio station
will play.
PLAY• PAUSE
DVD VIDEO DIGITAL SURROUND SYSTEM
TREBL
PLAY• PAUSE STOP SEATING SOURCE VOLUME
SEARCH SURROUND
PROG TUNING CLOCK•TIMER
BASS
EJECT
37