Samsung AM***FN*D series User Manual page 49

A A djusting air flow
9). When the air conditioning unit has stopped, check the Mode No. 8.1 is "1" for completion of Automatic
Air-Volume.
If the Mode No. 8.1 is "0", Automatic Air-Volume adjustment is fail. Then adjust the fan speed by referring the
E. S. P(External Static Pressure) setting table.
Main menu Sub menu
1
8
2
If the coil is not dry, run the unit for 2 hours with fan only to dry the coil.
The air filter is properly attached into the air passage on the air suction side of the air conditioning
unit.
Adjust the dampers so that each air inlet and outlet exhusts the designed airflow rate.
If using booster fans(an outdoor air processing unit or ERV via duct), do not use Automatic Air-
Volume function.
If the duct configurations have been changed, automatic air-volume function perform again.
48
Functions
Automatic Air-Volume
State Return
Automatic Air-Volume
Operation
SEG used Default
0 - OFF (Fail or Disable)
1 0 1 - Completion.
2 - Running Automatic Air-Volume.
0 - Disable
1 0
1 - Enable
Range