Menus And Control Overview; Main Menu; Status Screen - GE MOA 280i Operation And Maintenance Manual

MENUS AND CONTROL OVERVIEW

3.
Operation of the NOA 280i is performed using the four front panel buttons (UP
Arrow, DOWN Arrow, ENTER, and CLEAR) to run the menu-based firmware. Use
the UP or DOWN Arrow buttons to scroll through the menu options and select
values. The ENTER Button is used to select menu options and to save setpoints.
The CLEAR Button is used to exit menus and clear entries. The CLEAR Button is
also used to display the Status Menu from the Main Menu, select the Main Menu
from the Measurement Menu or to return to the Measurement Menu from the
Main Menu. A cursor is used for selection of the menu options and the location
A N A L Y S I S
C O N T R O L
0 4
of the cursor is indicated by a highlighted menu option.

Main Menu

There are five options in the Main Menu: Analysis, Control,, Calibration,,
Messages, and Maintenance,. A title field is located at the top of the menu, and
the date and time are displayed in the message line at the bottom of the
display. Select an option by using the Arrow buttons to highlight the desired
option, and press the ENTER button.

Status Screen

Press the CLEAR button from the Main Menu to display the Status Screen. This
screen shows the current values for the PMT cooler temperature, reaction cell
GE Analytical Instruments ©2006
M A I N M E N U
C A L I B R A T I O N
M E S S A G E S
M A I N T E N A N C E
J U L 0 0
Figure 3-1: Main Menu
3-1
0 8 : 1 7 : 3 1
DLM 14291 Rev. A