GE MOA 280i Operation And Maintenance Manual page 57

• From the Confirmation screen, press ENTER
to change the Mode.
• The menu will change briefly to indicate
that the Mode has been changed.
The Exhalation Mode has three additional
parameters that are set in the Modes Setup
Menu; Pressure Units, Desired Pressure and
Display Filter. Pressure Units determines the
units for the Breath Pressure transducer in the
Com Port output. Desired Pressure and Display
Filter only effect the bar graph in the
Measurement Menu. Desired Pressure sets the
value of pressure at the arrow and display filter
is used to filter the displayed pressure bar
graph.
The default unit for the exhalation pressure is
cm H O which
2
applications. To change the unit:
• From
the Modes
Exhalation.
• From the Exhalation Setup Menu select EXH PRESS UNIT.
• From the Exh Press Unit Menu, scroll to the desired pressure unit and press
ENTER.
• A confirmation screen is shown, press ENTER to change the unit.
To change the desired pressure (pressure value for arrow on Measurement Menu):
GE Analytical Instruments ©2006
is acceptable for
Setup Menu,
5-5
S E L E C T
N I T R I C
E X H A L A T I O N
c u r r e n t :
S E L E C T
C h a n g e
E X H A L A T I O N
E N T a c c e p t
c u r r e n t :
S E L E C T
C u r r e n t :
E X H A L A T I O N
C H A N G E
E X H A L A T I O N
E X H
D E S I R E D
D I S P L A Y
E X H
c u r r e n t :
most
E X H
C h a n g e
E N T a c c e p t
select
c u r r e n t :
MO D E
O X I D E
N I T R I C O X I D E
MO D E
t o :
C L R r e j e c t
N I T R I C O X I D E
MO D E
A C C E P T E D
S E T U P
P R E S S U N I T
P R E S S U R E
F I L T E R
P R E S S U N I T
m B a r
T o r r
c m H 2 O
c m H 2 O
P R E S S U N I T
t o :
T o r r
C L R r e j e c t
c m H 2 O
DLM 14291 Rev. A