Advertisement
Step12. Mark the servo control horn mounting
location on the aileron using the push rod as the
guide.
Step13. Install the torque rod to the aileron.
www.valuehobby.com/aviator-120-arf.html
Step14. Install a pin clevis to the torque rod.
Step15. Thread the push rod to the pin clevis, and
adjust to make sure the hole of the ball link is
aligned with the hole of the servo arm.
Step16. Attach the push rod to the servo arm using
M3*15mm socket head, M3 nut and M3 washers.
Repeat the previous steps for the remaining aileron
servo and flap servo.
9
Advertisement
