Advertisement
Section2. Main landing Gear Installation
Step1. Install one wheel axle to the landing gear
using a M8 nut.
Step2. Glue a wood support to the landing gear.
Step3. Slide two wheel collars and one wheel to
the axle.
www.valuehobby.com/aviator-120-arf.html
Step4. Attach the wheel pant to the wheel axle,
and use a M2.6 x 12mm self-tapping screw to
secure the pant to the landing gear.
Step5. Tighten two wheel collars to make sure the
wheel not to move along the axle.
Step6. Repeat step 1 to 5 for the other wheel and
wheel pant.
Step7. Use four M4*20mm socket head screws to
install the landing gear assembly to the fuselage.
10
Advertisement
