Port Trigger - Delta DX-2300 Series User Manual

3.3.4

Port Trigger

This page is used for setting up the port trigger, including configuring the Service Name, Service User, Service Type,
Trigger Port, Protocol Role, Begin Port, End Port, and Status.
Port triggering is port forwarding with an on/off switch for the ports that have been forwarded. Have data flown out of a
trigger port or not by enabling or disabling this functionality. Set up the time for the Port Trigger Timeout and click
"Save" to save the setting.
Click the "Add A Trigger Rule" to add port trigger entries to the router.
1.
After clicking the "Add A Trigger Rule", you will see the following page.
2.
Service Name
Set up the service name for port triggering. The name is composed of letters,
numbers and underline, starting with a letter or number. The maximum string
length is 32 bytes.
Service User
Select the service user to apply the port triggering rule.
Description
C ha pt er 3 I ntr o duc t i on t o F u nc t i o ns
Default
N/A
Any Address
_3
3 - 1 7