Interfaces And Indicators; Interfaces; Led Indicators - NetComm NP1201 User Manual

Interfaces and indicators

Interfaces

# Label
1 Reset button Use a paperclip to press this button for no more than 3 seconds to reset the unit to the factory default settings
2 Security Press the security button for 10 seconds to reset the private network password. Press the security button for no
button more than 3 seconds to begin pairing.
3 Ethernet Accepts either crossover or straight-through Ethernet cable.
port

LED indicators

What can the LEDs tell me?
The Powerline LED changes colour depending on the speed of communication between the powerline adapters.
LED Status
1.2Gbps Powerline Kit with Gigabit Port
v1.0
Status
Fastest possible connection speed. Powerline adapter is connected to the
On
Powerline Network.
Faster connection speed. Powerline adapter is connected to the Powerline
On
Network.
Fast connection speed. Powerline adapter is connected to the Powerline
On
Network.
The Powerline adapter is not connected to a Powerline network. This could be
Off
due to there being no network in range or the unit could not find another
paired unit on the power line.
An Ethernet device is connected via the Ethernet port of the Powerline
On
adapter.
Off No device connected to the Ethernet port of the Powerline adapter.
On Powerline adapter is connected to a powered wall socket.
Blinking The powerline adapter is pairing.
Off Powerline adapter is not powered on.
Description/function
Description
7 of 17
© NetComm Wireless 2017