Xerox Phaser 3600 Instruction page 9

17. Remove the two screws on the wiper blade.
Remove the blade. Clean out all the waste toner.
19. Slide the holders off the PCR assembly and clean the PCR
with your preferred PCR cleaner. Blow off the PCR cleaning
roller as well.
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
XEROX PHASER 3600 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
18. Install the new wiper blade and two screws.
20. Re-assemble the PCR assembly and install it in the waste
hopper. Install the two screws. Make sure it is not upside
down!
www.uninetimaging.com