Xerox Phaser 3600 Instruction page 18

48. Install the bottom metal plate. Insert the three tabs first
and rotate into place. Make sure all three locks snap into place
(two sides and middle).
50. Install the waste chamber into the frame.
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
XEROX PHASER 3600 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
49. Fill the hopper with 3600 toner (330g for the 12k and
165g for the 6k). Replace the fill plug and check for leaks.
51. Install the gold screw into the drum axle.
www.uninetimaging.com