Xerox Phaser 3600 Instruction page 22

XEROX PHASER 3600 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
63. Install the drum cover arms. Place the arm into place and 64. Install the shipping lock.
rotate the tail of the springs so they fit into their respective
slots.
65. Remove the screw and cover for the chip.
Replace the chip.
www.uninetimaging.com
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com