Digital Output; Lpcm Output - Philips DVP4000/78 User Manual

Digital Output

Set the Digital output according to your
optional audio equipment connection.
1
In 'AUDIO SETUP', press OK to enter
the submenu.
2
Press 3 4 to highlight {DIGITAL
OUTPUT}, then press OK.
3
Press 3 4 to highlight one of the options
below:
OFF
Turn off the digital output.
ALL
If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
PCM
Only if your receiver is not capable of
decoding multi-channel audio.
4
Select an item and press OK.
Helpful Hint:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
To return to the previous menu, press
TIPS:
To remove the menu, press
01-28 DVP4000_782
DVD Setup Menu Options

LPCM Output

If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
1
In 'AUDIO SETUP', press OK to enter
the submenu.
2
Press 3 4 to highlight {LPCM Output},
then press OK.
3
Press 3 4 to highlight one of the options
below:
48kHz
Playback a disc recorded at the sampling
rate of 48kHz.
96kHz
Playback a disc recorded at the sampling
rate of 96kHz that can only be achieved in
Stereo-Classic mode.
4
Select an item and press OK.
Helpful Hint:
– LPCM Output can be selected only when
PCM is activated.
OK
.
SYSTEM MENU
21
.
3139 246 14692
18/01/2005, 2:54 AM
21