Table of Contents
Advertisement
Problem
No return to start-up screen when
disc is removed
The player does not respond to
the Remote Control
Buttons do not work
Player does not respond to some
operating commands during playback.
DVD Player cannot read
CDs/DVDs
Menu items cannot be selected
Visit us at www.philips.com/support for service support
01-28 DVP4000_782
Solution
– Reset the unit by switching the player off, then on
again.
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
27
Troubleshooting
3139 246 14692
18/01/2005, 2:54 AM
27
Advertisement
Table of Contents
