Digital Watchdog DWC-MV421D User Manual page 11

1
Power
1
Power Connection
Please, check the voltage and current capacity of rated
power carefully.
Rated Power Consumption
AF Working Max 7.5W
DC 12V
IR ON : 4.2W /
WARNNING - DC Plug Cable
The DC Plug cable can be used when you need to extend the power cable.
please notice that one black cable aligned with white line stands for the
plus polarity.
<Extending Power Cable Using the DC Plug Cable>
2
Network Connection
Connect crossover cable into the RJ-45
3
Audio Output
Connect the 'Audio Out' plug of the camera to
speaker.
If the speaker amplifier
speaker with amplifier or separate amplifier is needed.
Alarm
Cable
2
Network
Connection
3
Audio Output
PoE
IEEE 802.3af
OFF : 2.5W
.
properly.
Mic.
4
Audio Input
Connect the 'Audio In' plug of the camera to
microphone directly or 'Line Out' port of
connected with microphone.
If the microphone is connected directly
microphone with embedded amplifier such as condenser
mic needs to be used.
5
Relay/Alarm Output
alarm lights, siren or lamps
activated according to the etup menu
setting.
6
Sensor/Alarm Input
to IR sensor, IrDA sensor or door
switch. If the sensor is activated, it can activate
device
6
Sensor/Alarm
Input
5
Relay/Alarm
Output
Amplifier
4
Audio Input
amplifier
,
alarm
.