Table of Contents
Advertisement
1. Press the DISP button repeatedly to display a screen mode other than [For
viewfinder], and then press the Fn (Function) button.
2. Select a function to be registered by pressing the up/down/left/right side of
the control wheel.
3. Set the desired setting by turning the control wheel.
Some functions can be fine-tuned using the control ring.
Performing settings on the dedicated screen
Select the desired function in step 2, then press
wheel. The dedicated setting screen for the function appears. Follow the operating
guide (A) to perform the settings.
on the center of the control
Advertisement
Table of Contents
