Table of Contents
Advertisement
avoid missing a shooting opportunity, charge the battery pack before shooting.
1. Turn the power off.
2. Connect the camera with the battery pack inserted to the AC Adaptor
(supplied) using the micro USB cable (supplied), and connect the AC Adaptor
to the wall outlet (wall socket).
Charge lamp
Lit: Charging
Off: Charging finished
Flashing: Charging error or charging paused temporarily because the camera
is not within the proper temperature range
If the charge lamp lights up once and then immediately turns off, the
battery pack is fully charged.
Charging time (Full charge)
The charging time is approximately 150 min. using the AC Adaptor (supplied).
The charging time may differ depending on the remaining capacity of the
battery pack or the charging conditions.
The battery pack can be charged even when it is not fully depleted.
The above charging time applies when charging a fully depleted battery pack
(supplied) at a temperature of 25°C (77°F). Charging may take longer
depending on the conditions of use and the environment.
Note
If the charge lamp flashes when the battery pack is not fully charged, remove
the battery pack or disconnect the USB cable from the camera and then re-
insert it to recharge.
If the charge lamp on the camera flashes when the AC Adaptor is connected to
Advertisement
Table of Contents
