Table of Contents
Advertisement
Note
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
[Sweep Panorama]
When [ISO] is set to a value lower than ISO 125, the range for recordable
subject brightness (dynamic range) may decrease.
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting
still images, shooting movies, or using HFR.
When shooting movies, ISO values between ISO 125 and ISO 12800 are
available. If the ISO value is set to a value smaller than ISO 125, the setting is
automatically switched to ISO 125. When you finish recording the movie, the
ISO value returns to the original setting.
When you use [Multi Frame NR], it takes some time for the product to perform
the overlay processing of images.
Hint
You can change the automatically set ISO sensitivity range for the [ISO AUTO]
mode. Select [ISO AUTO] and press the right side of the control wheel, and set
the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The
values for [ISO AUTO Maximum] and [ISO AUTO Minimum] are also applied
when shooting in [ISO AUTO] mode under [Multi Frame NR].
[100] How to Use
ISO AUTO Min. SS
If you select [ISO AUTO] or [ISO AUTO] under [Multi Frame NR] when the
shooting mode is P (Program Auto) or A (Aperture Priority), you can set the
shutter speed at which the ISO sensitivity starts changing.
This function is effective for shooting moving subjects. You can minimize subject
blurring while also preventing camera shake.
1. MENU→
Using shooting functions
(Camera Settings)→[ISO AUTO Min. SS]→desired setting.
Selecting the ISO sensitivity
Advertisement
Table of Contents
