Ground Preparation; Installation Notes - HotSpring PULSE Instructions Manual

Limelight collection
Hide thumbs Also See for PULSE:
Table of Contents

Advertisement

GROUND PREPARATION

Your Hot Spring spa has been engineered to perform on several kinds of surfaces. While a concrete slab is best for
long-term use*, other foundations are acceptable so long as a level base is prepared prior to delivery.
*NOTE: A reinforced concrete pad at least four inches thick or a deck that is able to withstand more than 125lbs. per
square foot is recommended for the Gleam
per square foot is recommended for the Flair
100lbs for the Glow
®
spas.

INSTALLATION NOTES:

• If stepping stones or railroad ties are selected for the spa
foundation, they should be placed at the designated leveling
areas of your spa to maintain even distribution of the spa
weight.
• It is important to note that soft surfaces, even when stepping
stones are used to distribute the weight of the spa as evenly
as possible, will still have a tendency to settle unevenly,
resulting in an unlevel spa.
• Remember, placing the spa on grass or dirt may increase
the amount of debris which is inadvertently brought into the
spa water on the user's feet.
If you are purchasing a deck package or a gazebo with your spa,
a solid foundation becomes mandatory. Placing them on any
surface other than a single level pad could create problems with
their installation. Pictured at right are a few of the recommended
surfaces.
As a homeowner, it is your responsibility to provide a suitable, level
foundation for your spa. Keep in mind that most delivery crews are
not equipped to level and prepare spa sites.
If you are interested in having a concrete slab, brick surface, or
wood deck installed, your Hot Spring dealer should be able to suggest a qualified, licensed contractor.
NOTE: In order for the spa to operate properly and the internal plumbing to drain completely, you must ensure that
the spa is leveled after it has been installed.
Pre-Delivery Instructions
, 115lbs. per square foot is recommended for the Pulse
®
spa and 105lbs. per square foot is recommended for the Bolt
Page 4
FOUNDATIONS FOR HOT TUBS
WITH ACCESSORIES
CONCRETE PADS
BRICK SURFACES
WOOD DECKING
®
spa, 110lbs.
and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

GleamFlairGlowBolt

Table of Contents