Care And Cleaning - CookTek MCD1800G Installation & Operation Owner's Manual

Your CookTek Induction Cooktop is easy to keep clean. Be sure to follow these
instructions:
● Turn the unit OFF and remove the plug from any power outlets prior to cleaning.
● When the unit is cool, wipe the surface and body with a damp cloth. Use a mild
scouring agent on the stainless steel housing such as Bon Ami or Barkeeper's
Friend for grease or resistant soiling. Do not use a lye-based cleaner, such as
an oven cleaner, as it may damage the cooktop.
● To clean the glass surface, use a mild detergent or glass cooktop cleansing
cream.
● Never immerse the cooktop in water or put it in the dishwasher.
This unit comes equipped with a grease filter(s) to protect the electronics from
contaminants.
Grease filter cleaning procedures:
Frequency
● Grease filter(s) should be removed and cleaned every two weeks. More
frequent cleaning may be necessary if they appear clogged and/or operate in
heavy grease laden environments.
Procedure
● Slide filter(s) out of the track on the bottom of the unit.
● Back flush with hot water to remove dirt and grease.
● Shake remaining water out and let stand until completely dry.
● Reinstall filter(s) ensuring the arrow on the edge of the filter(s) is pointing into
the unit.
NOTE: Filters are dishwasher safe.
Caution
● Do not operate the unit without the grease filter(s) installed.
● If the unit displays and error code of "E4" - the overheat error - this may indicate
a clogged filter. Follow the procedure above and let the unit cool down before
resuming operation (turn off for approximately 5 minutes).

CARE AND CLEANING

GREASE FILTER MAINTENANCE
11