Firmware Update Instructions - Street Guardian Sg9665GC User Manual

Firmware update instructions

Any updated firmware will be made available on the support section
of our website https://streetguardian.info/support
To update the firmware the process is as follows
• Extract the zipped firmware file downloaded from our website
• Delete any files from the memory card
• Copy the firmware bin file to the empty memory card
• Insert the card to camera
• Connect to power, do not disconnect power at any time during
update process
• Camera will power on, screen will remain blank while updating
• Once update has finished camera will startup as per normal
• Stop any active recording
• Enter settings menu and format the memory card
• Enter settings menu and reset default settings
• Any personalised settings will need to be re-entered
• If using GPS ensure time is synced before use
• Process is complete